Download Download

IS-8 Mortar

IS-8 Mortar
Fireclay Mortar for Refractory Brick Lining

IS-8 Mortar Manufacturer & Exporter in India

 

At Oryvia Refractories, we offer IS-8 Mortar as a refractory bonding material for industrial refractory brickwork. IS-8 Mortar is a fireclay-based mortar designed for laying and joining refractory bricks in high-temperature installations. It helps form joints between refractory bricks and supports the construction of refractory linings used in industrial thermal equipment.

Our IS-8 Mortar product specifications include defined chemical composition, grain-size characteristics, water requirements, application temperature and sintering temperature. These parameters help refractory contractors, engineers and industrial procurement teams evaluate the material for their specific brick-laying requirements.
 

Product Characteristics of IS-8 Mortar
 

IS-8 Mortar is a fine-grained refractory bonding material intended for mortar application in refractory brick construction. Its bonding characteristics and application requirements make it relevant to refractory lining work where suitable fireclay mortar is required.
 

  • Refractory bonding
  • Fine grain structure
  • Bond characteristics
  • Water requirement
  • Thermal suitability
  • Sintering


Industrial Applications of IS-8 Mortar
 

IS-8 Mortar is intended for suitable refractory brick-laying applications where fireclay-based bonding material is required. Its suitability should be evaluated according to the refractory brick composition, operating conditions and installation requirements.

Potential application areas for suitable refractory mortar include:

  • Industrial furnace refractory brickwork.
  • Boiler refractory brick lining.
  • Industrial kiln construction and maintenance.
  • Heat-treatment furnace brick joints.
  • Refractory lining installation and repair work.
  • Industrial thermal processing equipment.

The correct mortar selection depends on the type of refractory bricks, operating temperature, furnace atmosphere and service conditions.
 

Product Selection Considerations
 

Before selecting IS-8 Mortar, we recommend evaluating the following technical requirements:

  • Refractory brick compatibility
  • Operating conditions
  • Grain size
  • Water requirement.
  • Thermal performance
  • Storage
     

Packaging and Storage
 

Our listed IS-8 Mortar packaging specification is a 25 kg HDPE bag. For best performance, the specified dry storage life is nine months. The material should be protected from moisture and stored in suitable dry conditions. Buyers should confirm the applicable batch information and storage instructions before use.

Why choose us

01
Application-Focused Mortar Solutions We provide IS-8 Mortar for suitable refractory brick-laying applications. Our product information helps industrial buyers evaluate bonding requirements, grain size and application conditions before selecting the appropriate material.
02
Defined Technical Specifications Our IS-8 Mortar specifications include chemical composition, grain size, water requirement, application temperature and sintering temperature to support technical evaluation and purchasing decisions.
03
Industrial Refractory Experience With over 30 years of company-wide experience, we bring established knowledge of refractory materials and industrial applications to our product portfolio.
04
International Business Reach Our business serves customers across more than 20 countries. We welcome enquiries from international importers, refractory distributors, contractors and industrial procurement teams.
05
Professional B2B Enquiry Support We encourage buyers to share their brick specifications, installation requirements, application details and purchase quantities so our team can discuss relevant product information and quotation requirements.
Technical Specification

Product Data Sheet For Calcined Bauxite

General Properties Unit Value
Nature of bond - Air Setting / Ceramic
Method of application - Mortar
Top of grains size Mm 0.5
Water for Toweling consistency % 15 – 27
Maximum safe application Temperature °C 1200
Sintering Temperature °C 950
CHEMICAL ANALYSIS
Al₂O₃ % 35 – 40
Fe₂O₃ % 3.7 – 5.1
PHYSICAL / THERMAL PROPERTIES
Retained Above Maximum Size % 1.6
Pyrometric Cone Equivalent Orton / °C 12 / 1285
Packing - 25 Kg HDPE Bag
Dry storage life for best performance - 09 Months

Frequently Asked Questions

  • What is IS-8 Mortar?
    IS-8 Mortar is a fireclay-based refractory bonding material used for laying and joining suitable refractory bricks. We offer it for refractory brickwork applications where appropriate mortar bonding is required in industrial thermal installations.
  • What is the chemical composition of IS-8 Mortar?
    Our listed IS-8 Mortar specifications indicate an aluminium oxide (Al₂O₃) content of 35–40% and ferric oxide (Fe₂O₃) content of 3.7–5.1%. Buyers should review the applicable technical documentation when evaluating the material for a particular refractory installation.
  • What is the maximum safe application temperature of IS-8 Mortar?
    The specified maximum safe application temperature of our IS-8 Mortar is 1200°C. Its listed sintering temperature is 950°C. These are separate technical parameters and should not be treated as interchangeable. Final suitability depends on the complete lining design and operating conditions.
  • What is the grain size of IS-8 Mortar?
    The specified top grain size of IS-8 Mortar is 0.5 mm. Grain size is an important consideration when selecting refractory mortar for brick joints and evaluating the requirements of refractory brick installation.
  • ow much water is required for IS-8 Mortar?
    The specified water requirement for towelling consistency is 15–27%. Actual preparation should follow the applicable product instructions and installation requirements. Contact our team if you require clarification regarding the correct preparation of the product.
  • What is the packaging of IS-8 Mortar?
    Our listed IS-8 Mortar packaging specification is a 25 kg HDPE bag. Buyers requiring bulk quantities should contact our team to discuss their purchasing requirements and confirm available commercial packaging.
  • What is the storage life of IS-8 Mortar?
    The specified dry storage life for best performance is nine months. We recommend protecting the material from moisture and maintaining suitable dry storage conditions. Buyers should check the applicable product batch information and storage instructions.
  • How can I enquire about IS-8 Mortar from Oryvia Refractories?
    You can contact our team with your required quantity, refractory brick type, installation application and operating temperature. We welcome enquiries from industrial buyers, refractory contractors, distributors and international importers seeking product specifications and quotations.
Call WhatsApp LinkedIn Contact